- Medium 3.2 lbs. / 1.45 Kg;
- Large 3.3 lbs. / 1.48 Kg;
- X-Large 3.5 lbs. / 1.58 Kg
Made in the USA by Armor Source. The best performing, best made and most trusted helmets on the planet.
Shells
The AS-200 Ballistic Helmet is the most affordable ACH/ MICH Shape NIJ Level IIIA protection helmet on the market today Offering proven fragmentation protection capabilities matched by our dedication to trim unwanted weight, the AS-200 is adaptable for use with all ArmorSource accessories, rails and shrouds and is relied on today by military organizations worldwide.
Support and Retention
The AS-200 Series Helmet comes with the AireLink retention system designed for boltless and bolted ballistic helmets. Durable and weight-conscious, this ACH style retention/chinstrap is the preferred solution for military organizations throughout the USA and around the globe. This 4 point system features 3/4” nylon webbing, a large nape pad and heavy duty chin strap clip offering a wide range of adjustments and reduced weight as compared to standard hardware based retentions.
Replaces the R2 and R4 Retention Systems
The new AireSupport Prime system introduces a unique approach to modern day suspension systems. When combined with ArmorSource’s certified shells, the AireSupport Prime aids our solutions in exceeding the U.S. Army’s Blunt Impact requirements, improves ballistic and environmental performances, and delivers optimal comfort for users with a 30% weight reduction vs equivalent premium systems.
Replaces P4 Suspension System.
All Helmets Are Custom Made to Order
5 Week Estimated Lead Time
LEVEL IIIA ACH Helmet
- High Cut Shell
- Velcro
- Bungee
- M-Lock Aire Rail System
- Aire Mount NVG Shroud
- Aire Link Retention System
- Aire Support Cushion System
- Adjustable CAM Retention System
PISTOL THREATS DEFEATED
| Weapon | Ammunition | STRIKING VELOCITY ft/s |
STRIKING VELOCITY m/s |
| 9mm | 50-grain USM4 | 2490 | 759 |
| 9mm | Fiocchi, 115-grain FMJ | 1540 | 469 |
| 9mm | 124-grain Hydra-Shok JHP | 1230 | 375 |
| 9mm | 124-grain FMJ | 1425 | 434 |
| 9mm | 124-grain FMJ Steel | 1262 | 385 |
| .357 | 100-grain Frangible SF | 1774 | 533 |
| .357 | 115-grain JHP | 1645 | 501 |
| .357 | 125-grain SIG FMJ FN | 1475 | 450 |
| .357 | 125-grain GDHP | 1454 | 443 |
| .40-cal | 95-grain S&W HP | 1697 | 517 |
| .40-cal | 115-grain S&W JHP | 1249 | 381 |
| .40-cal | 180-grain S&W JHP | 1098 | 35 |
| .44 Magnum | 240-grain SJHP | 1412 | 430 |
HOW TO FIT YOUR HELMET
Getting the right fit is important for performance and comfort. Use a tape measure and caliper to take measurements. The wearer MUST be seated in an upright position for proper fitting. See the illustrations for correct measuring points.
NOTE: If any measurement falls on the dividing line between sizes, select the larger size.
| Small | |
| UP TO 7¼” / 184 mm | Length |
| UP TO 6½” / 162 mm | Width |
| UP TO 21¼” / 538 mm | Circumference |
| Medium | |
| 7¼” / 184 mm to 7¾” / 198 mm | Length |
| UP TO 6½” / 162 mm | Width |
| 21¼” / 538 mm to 22½” / 573 mm | Circumference |
| Large | |
| 7¾” / 198 mm to 8¼” / 210 mm | Length |
| UP TO 6½” / 162 mm | Width |
| 22½” / 573 mm to 23½”/ 597 mm | Circumference |
| Extra-Large | |
| 8¼” / 210 mm and over | Length |
| 6½” / 162 mm and over | Width |
| 23½”/ 597 mm and over | Circumference |
Reviews
There are no reviews yet.